A garden pool is like no other pool. it requires a specific excavation and
maintenance to properly make use of the walls and the general
structure of the construction.
have space in the garden and you have thought of improving it, at
homify we offer you ideas and professionals
specialized in it. It is essential to follow the proper steps to
build in your garden and identify what kind of pools there are and which is the best
that suits you according to your space and needs, the budget you have
and the details of the finishes.
you have to keep in mind for a garden pool?
the land is very important, because it determines if your garden is
large enough to carry out the necessary excavations. Contrary to what
happens with a common garden pool, this requires you to think not
only in the excavation area, but also at the edge of the pool if you
are going for a luxury infinity look.
the land must be dedicated to recirculation and water filter systems.
These constructions by law must have a minimum space for two
people in each 2m² of water surface and a strip of at least 1.5
meters wide around the structure.
on which it is built must be firm and solid, no rocky or swampy
areas, as construction may not be effective..
study the space and calculate 1.20 meters of depth.
building it next to trees, as the roots can intervene in the future
when they grow.
much does it cost to build a garden pool in Malaysia?
pools constructed using vinyl pool liners are very affordable and
recently a commonly used option. These swimming pools can be built
either above-ground or below-ground (in-ground), and customised to
the space available in your garden. The price depends on its size
more than anything else, for example RM39,000 for an above ground
swimming pool of 20 feet by 10 feet and 4 feet deep. Or RM49,000 for
a 13 feet by 8 feet high end fiberglass swimming pool installed below
are different Type of garden pools and their building materials?
on where the structure is located we can categorize the types in two:
garden pools: They tend to be portable and easy to carry. They can be
inflatable or built in PVC. These are the most economical in the
market. Perfect when the budget is low and the garden is small
garden pools: These are more common, durable and permanent. It
requires the intervention of heavy machinery and the intervention of
a construction company, architects and workers. They cost more money
but last for many years and can have different finishes.
according to the material used we can categorize them in:
pool: They are the most expensive but at the same time the most
solid. These can have certain finishes and unique shapes that no
other garden pools can get, such as curves at one of the edges.
pool: 100% made in a factory, has a resin and fiberglass base. It
comes fully ready in one piece, ready to be installed on the floor.
It is economical and the fastest construction method out there.
Container pool: A container pool is a pool recycled from a large
container. You can plant them in the ground or use them as
above-ground alternative. They are less expensive than fiberglass and
concrete and a green choice for environment.
liner: They are also manufactured, but the difference is that they
come with steel, concrete or resin panels. Everything is secured by a
liner. These finishes facilitate their construction and reduce their
cost. They are very cheap. They are industrial garden pools that come
with a kit ready to install.
keep the water in your garden pool clean?
and maintenance is very important for pools and spas.
It is necessary to activate the purifier six hours a day and check PH
and chlorine levels. Above that, the bottom should be cleaned once a
i make sure of health levels in my pool?
PH just so it does not irritate the eyes and skin. PH must be between
7 to 7.8, alkalinity between 80 and 120 ppm. It is necessary to
measure the PH of the garden pool every 10 days, and even better if
it is measured more frequently.
chlorine so that the water does not become cloudy or leave algae.
Chlorine is a more delicate issue, since it helps a lot to the health
of people and the pool, so it is advisable to measure it at least
twice a week. Chlorine level should be between 1.0 and 2.0 ppm
acid, in addition to helping you clean your pool, gives you that
crystal clear color it needs. It also adds freshness to the water.
This is one of the most important and fundamental substances for your
garden pool, but it is not necessary to be measuring it very often,
twice during the season in which you decide to use it. Cyanuric acid
should be between 40 and 80 ppm.
flocculant filter so it will clarify the water and keep it crystal
for the chemical treatment to be effective, it is necessary to take
good care of the filter.